TSMC landing case has a high shutdown rate today

The product details are displayed in a tech-focused layout. The main section features a large image window with several slides showing different components of the product. Each slide includes an image and a brief description: - **Probe high frequency needle 10445 with line high frequency needle with 1 high frequency core can pass 3A** - **Single chip microcomputer STM32L151CCU6** - **Shunluo Inductance Power Inductor SWPA Series First Class Agent** - **6.3V220UF Volume: 5X8 own factory direct sales - solid capacitor - patch aluminum** - **High-power led lamp beads 1W white light Sanan 30mil high power LED lamp beads imitation lumens** Below the main image, there are thumbnail previews for navigation. --- Today, the Ministry of Economic Affairs is reviewing TSMC’s investment case in Nanjing. This follows recent approvals for the first phase of the TSMC Nanjing project located in the Jiangbei New District. The review meeting will focus on TSMC's proposed 12-inch wafer fabrication plant in mainland China. It is expected that the key technical review group has already approved the case, and the application is structured as a sole proprietorship. The background appears straightforward, increasing the likelihood of approval from the authorities. The Investment Review Conference announced that the official meeting will start at noon today, with results expected to be released by 4 PM. TSMC’s board of directors recently approved the establishment of a wholly-owned subsidiary in the Pukou Industrial Zone in Nanjing. The project is subject to government approval and involves setting up a 12-inch wafer fab along with a design service center, with an investment cap of no more than $1 billion. TSMC stated that once the necessary approvals are obtained, the Nanjing investment plan will be officially launched. The company is currently preparing detailed information to submit to the relevant authorities. An official start-up date is expected to be announced in the second half of this year. According to the Ministry of Economic Affairs, the five main points of review include ensuring that the technology used in the mainland facility lags behind TSMC’s technology in Taiwan by at least one generation. Other considerations involve maintaining R&D and investment levels in Taiwan, avoiding job cuts in Taiwan due to investments in China, and ensuring the applicant retains full control over the new or M&A investment. TSMC’s application for a 12-inch wafer fab in China is submitted as a fully-owned investment, with no land capital involvement, making the process simpler. It has already passed the key technical review team meeting, and the chances of approval are considered high.

Agricultural Machinery Accessories Parts

Agricultural machinery parts more generally summarizes the machinery parts associated with agricultural production, the coverage is very wide. Such as: tractor power mechanical parts, tires, bucket, etc., harvester including potato harvester, peanut harvester, agricultural machinery and tools (pear. Take the plough as an example, the plough includes the disc plough, moldshare plough, animal force plough, the component of the whole machine includes the plow tip, the plow leg, the plow share, the plow piece and so on. Related industries, the production of supporting products accessories can be called agricultural machinery accessories.

What are common agricultural machinery accessoriesNow rural use of agricultural machinery is common, in the job, because of farmland environment is bad, so most of farm machinery accessories used are consumables, need to change regularly, in order to avoid failure, farm machinery accessories usually used are:1, agricultural tiresQualified agricultural tires tues both sides have the trademark, model, specification, layer number and the cord material etc, and clear, eye-catching, some still carries with production and inspection chapter; Inner surface should be smooth with brightness, the hand has the elasticity. If the tyre surface identification is not complete or fuzzy, inner tube lacklustre, tire body thin and uneven thickness, hand inelastic, is defective.2, threadProduct appearance should be bright and clean without rust, without defects, continuous spiral arm, no burr, no crack. Will be specimen and standard accessories spinning together, should be able to spin to the terminal, and no card lag phenomenon in the process of precession; Spin after flipping the fittings should be without shaking and sound, and if the thread has defects such as corrosion, crack, burr, spin the move after fitting will shake, for inferiority of quality.3, the gearQualified gear packing should be in good condition, tooth surface should be smooth and no cutting marks, no burr, and coated with anti-rust oil or wax, gear profile usually have code, with a hacksaw blade broken crop row gear face, should be no scratches or only a fine scratches. If the gear surface have burr, notching, rust, sharp strokes with sawdust and Nick (insufficient hardness), the poor quality.4, V beltQualified V belt surface is smooth, seamless joint glue, outside the circle on a clear trademark, specification, manufacturer name and logo, the length of the same type of V belt should be consistent.If the V belt look rough, uneven glue joint or openings, shade thrum exposed edges, no marks or blur, the V belt length is differ, it is false and inferior product.5, V belt wheelQualified V belt wheel surface porosity, crack, grooved smooth, V belt buckle grooved, V belt is slightly higher than that of slot and the bottom of the V belt is not drain contact. If discover wheel blowhole defects such as trough, the groove surface shape and qualified V belt do not form a complete set, it is bad.

Agricultural cnc machining,metal parts

Tianhui Machine Co.,Ltd , https://www.thcastings.com