Electric fan cleaning small coup

After the beginning of autumn, the weather gradually turned cold, and soon the fans would be re-arranged and packed into boxes. Using a summer fan, you will find that there are a lot of dirt and dust inside the fan blades, so obviously it is not suitable for storage in the box, and long-term will affect the life of the fan. The following Xiao Bian talks about the steps of cleaning the electric fans, and hopes to help everyone to better clean the fans and save and maintain the fans.

1. Turn off the fan power and allow the fan to “take a break” to avoid the fan’s hair becoming hot and hurting.

2. Use a screwdriver to open the fixing screw in the circle above the ceiling fan guardrail, and place the removed screw in a small container and lose it.

3. Take out the outer fan cover, and put the fan cover and fixed fan cover into the clean basin.

4. Rotate and fix the components of the fan blade. The disassembly is to rotate clockwise. If you do not know how to rotate, you can try it in the opposite direction, and put the components that have gone down into the clean basin.

5, demolition fan. The fan blades are generally pulled out directly, and they can be pulled out slowly, so that the fan blades can be removed. Put the disassembled blades into the clean basin as well.

6. Continue to remove the parts that fix the rear blades. This part is usually rotated counterclockwise to remove it. After removal, the rear fan guardrail is taken out at the same time, so that the main components of the floor fan needing cleaning are basically disassembled.

7. Add various detergents in the clean basin, add detergent, add water, and clean them one by one with a rag. Clear and clean all kinds of components, dry and dry in a ventilated place.

8. Use a clean rag to clean other parts of the floor fan, such as the floor fan base, branches, and head. Be careful not to use too much water on the rag to prevent it from entering the fan and causing a short circuit.

9, after the cleaning is completed, after the fan is dry, one by one in accordance with the reverse order of disassembly can be installed.