IPO restarts dystocia LED companies to accelerate mergers and acquisitions

[High-tech LED reporter Zhao Hui] Recently, the spokesperson of the China Securities Regulatory Commission (CSRC) spokesperson said that the IPO will not be activated after the implementation of the reform opinions, which means that the IPO's expectation of restarting during the year has greatly cooled down. Enterprises, brokers, and venture capitalists waiting for the IPO to open are in a more embarrassing situation.

IPO restarts during the year

On September 27, the spokesperson of the China Securities Regulatory Commission said that since the IPO reform opinions were solicited in June, various circles of the society have put forward a lot of suggestions. The CSRC has made revisions and supplements to the reform opinions, and is actively preparing and preparing supporting reform documents and technical measures.

The spokesman said that the CSRC is cautious in resuming the issuance of new shares. The long-term suspension of new share issuance is not conducive to long-term equity financing of enterprises, and it also adds uncertainty to market operations, which is not conducive to long-term stable and healthy development of the stock market. However, it is necessary to carry out major reforms in the past IPO measures to maximize the protection of the legitimate rights and interests of investors, especially small and medium-sized investors. Therefore, the restart of the IPO must be combined with the reform of the institutional mechanism, rationalize the relationship between the market and the government, and promote the return of all parties in the market. Do your best.

This statement has been nearly four months since the "Opinions of the China Securities Regulatory Commission on Further Promoting the Reform of the New Share Issuance System (Draft for Comment)" issued on June 7.

“The biggest difference is that the regulator first mentioned the relationship between IPO suspension and market development for the first time, and clarified that long-term pauses are not conducive to market development,” said one brokerage executive.

The executive said that even if the official opinion draft was issued, it still required a complicated approval process, and the IPO restart also needed to launch supporting reforms along with the new share reform opinions. Estimated, the possibility of an IPO restarting during the year is not large.

According to statistics from the China Securities Regulatory Commission, as of September 26, 2013, there were 176 IPO queuing companies on the Shanghai Stock Exchange, 308 companies on the Shenzhen Stock Exchange, and 141 companies that had been terminated. There are 264 companies on the GEM, and 134 companies have already terminated this year.

"At present, I can only wait. I hope that the IPO reform opinions will be released as soon as possible." A person in charge of the LED company that has passed the IPO preliminary review told the "High-tech LED" reporter that the LED demand is improving this year, and the company's revenue and profits are not bad.

The hot launch of LED companies began in 2011, and the LED companies listed before this were mainly concentrated in the upstream epitaxial chip. Since 2010, listed companies have concentrated more on packaging, display and lighting applications.

At present, the LED companies waiting for listing in the Shanghai and Shenzhen stock markets include Opp, Kelly, Ocean King, Mulinsen, Yuanhui Optoelectronics, Ai Biesen and other enterprises, mainly focusing on downstream lighting and power supply and other supporting materials.

Among the companies with LED-related business as their main business, the list of IPOs that have been terminated for review in 2013 is Dalian Luming Luminescence Technology Co., Ltd., Yunnan Lanjing Technology Co., Ltd., and Beijing Jinlixiang Yicai Technology Co., Ltd. Co., Ltd., Shengdi Optoelectronics Technology Co., Ltd., Shenzhen Cuitao Automation Equipment Co., Ltd. and other six LED companies.

LED industry mergers and acquisitions accelerate

“M&A and restructuring will undoubtedly accelerate.” A researcher at Guosen Securities said that the IPO was unable to open the gate, and with the impact of the financial verification storm, a group of enterprises will stop listing and switch to mergers and acquisitions to achieve alternative listing.

According to the researcher, many listed companies have recently fled the indefinite queue and turned to the acquisition of listed companies.

This trend has also appeared in the LED industry.

On September 28, Furi Electronics announced that the company had completed the procedures for equity transfer and industrial and commercial registration change. So far, the company holds 92.80% equity of Shenzhen Mairui Optoelectronics Co., Ltd., Shenzhen Maiguang Optoelectronics Co., Ltd. became the company. Holding subsidiary.

According to industry insiders, Mairui Optoelectronics originally had an independent listing plan. Due to the fierce competition in the display industry in the past two years, the price war was ordinary, the profitability was not as good as before, and the difficulty of independent listing became bigger. Mai Rui also turned to an alternative listing through the acquisition of listed companies.

Since the second half of 2012, the integration of M&A in the LED industry has gradually begun.

In August 2012, Jingdian acquired the remaining 49% equity of Guanggao through equity transfer and became its wholly-owned holding company.

Subsequently, Xiamen Sanan, a wholly-owned subsidiary of Sanan Optoelectronics, subscribed for a 19.9% ​​stake in Huanyuan Optoelectronics, a listed company in Taiwan, for 2.325 billion Taiwan dollars (approximately 505.68 million yuan).

In April, Ganzhao Optoelectronics (SZ.300102) acquired Dongguan Zhoulei, and then Maanshan Yuanrong announced the successful acquisition of Jiangxi Ruineng Technology, Sanan Optoelectronics and Weiwei Co., Ltd. to establish LED lighting company.

In the field of LED display, the recent wave of integration is a wave of high waves. Chau Ming Technology acquired a 60% stake in Redio, and Furi Electronics acquired a 92.8% stake in Mairui Optoelectronics.

On July 30, the listed company Keheng announced the announcement of foreign investment. The company decided to acquire 51% of Shenzhen Lian Teng Technology with its own funds of 10.95 million yuan.

"The mergers and acquisitions in the LED industry will be more and more, because in the current situation, enterprises will find it difficult to go public, but the demand for funds is expanding." Recently, Hongli Optoelectronics Co., Ltd., which acquired a 38% stake in Foda Signal Deng Shou-ti said that these acquired companies often face problems in terms of capital and brand, and the LED industry has become increasingly hot in recent years. After all, only to survive can we talk about profitability.

Previously, the shareholding ratio of Fo Da Signal was that Hongli Optoelectronics held 62% of the shares, and two natural person shareholders Dong Jinling and Liu Xinguo held 30 and 8% equity respectively.

Deng Shoutie said that before the acquisition, Fo Da signal wanted to expand the scale, but other shareholders have limited financial strength and cannot increase capital at the same time. Through the acquisition, Fo Da Signal has become a 100%-owned enterprise of Hongli Optoelectronics. Hongli Optoelectronics will use Fo Da Signal as a main business and a new profit growth point to increase investment.

“After the IPO listing materials, enterprises can no longer accept the input of external funds, especially venture capital. In the period when the industry exceeds expectations and develops rapidly, enterprises often need to rapidly expand production capacity and need to re-plan the future. Dr. Zhang Xiaofei believes that M&A integration is the best choice for LED companies at this stage.

[Note: This article is a high-tech LED reporter original , reprinted please obtain a reprint agreement in advance, legal reprint please refer to: high-tech LED copyright maintenance - "anti-infringement action" statement , otherwise it will be deemed illegal reprint, this website will be held legally responsible ! 】

XLPE Insulated Al Alloy Interlocked Cable is kind of cable, in which the rare earth high compressed aluminum alloy is used as conductor, and PVC is used as Jacket wound around. The insulation adopts XLPE material, featuring with high stability and flexibility. Outside the inner wrapping is the self-locking armour, which boasts of superior economic performance. The whole structure is designed and manufactured elaborately based on advanced international technology and  equipment. This cable removes the defects of aluminum cable systematically. And the great flexibility allows this cable to be bent at the corner. With easy installation, it presents excellent mechanical performance and large circuit transmission capacity.

Standard: GA306                         Jacket: PVC

Conductor: aluminum alloy          Cores: single core or multicore

Insulation: XLPE                           Feature: flame retarded

Wind: embossing polyester tape wrapping

Armour: interlocked aluminum alloy armour

Rated voltage: 0.6/1KV, 8.7/10KV, 8.7/15KV, 26/35KV

 self-locking armour


  • Easy to bend
  • Light weight
  • Easy installation
  • Long life span
  • Flame retarded
  • Decent mechanical strength
  • Creep resistance
  • Impact resistance
  • Zero halogen & low smoke
  • Corrosion & abrasion resistant
  • ...

XLPE Insulated Al Alloy Interlocked Cable


  • Public amenities such as theatres, cinemas
  • Mines
  • Transport hubs (railway stations, airports etc.)
  • For civil use
  • For commercial use
  • For industrial use
  • Schools
  • Large venus
  • Electrical equipment in hazardous areas
  • And many more...

Welcome to visit our factory to learn more about us. If you have any questions, please feel free to contact us. 

XLPE Insulated Al Alloy Interlocked Cable

XLPE Insulated Al Alloy Interlocked Cable,Al Alloy XLPE Interlocked Armoured Cable,Interlocking XLPE Insulated Cable,Interlocking XLPE Insulated Cable

Fujian Lien Technology Co.,Ltd , http://www.liencable.com

Posted on