Xiao Bian himself usually likes to delve into the arts, and especially enjoys a strong artistic atmosphere. When he is alone in the night, he enjoys a small movie, coughing and coughing, but the speed is always dragging his legs. . .
Xiao Bian really wants to cry helplessly. People who like art suffer from this setback. In order to better study the arts, Xiao Bian specially learned several ways to strengthen the WIFI signal strength in daily life. Share it with everyone here so that when fellow artists are enjoying art, they are not dragged by the speed of the internet.
First of all, we must arrange the location of the router
Many friends always put the router in a corner of the house. The more inconspicuous the better. It's so good that the remote signal is good, and you don't pick up the signal in the corner. The most suitable location should be at the center of your home.
Do not put the router on the floor
Many people do not know that routers actually spread their signals downwards. If they are on the ground, the results of their home routers are not strong enough. This is not very embarrassing. So try to put your router higher.
Stay away from other appliances
We all rely on signals to eat. What's more, if you have a small router and your legs are twisted on the arm of others, it will naturally affect the speed of your network. So please leave the router as far away as possible from other appliances. Let him work without stress.
Keep the antenna in different directions
The direction of the antenna determines the range of radiation of the signal. If the two antennas keep the same direction, it will allow a range of intensity to overflow, so that the signal cannot be transmitted in all directions. So put the antenna of the router in different directions so as to enlarge the signal range.
Well, the above methods are feasible, Xiao Bian, but after personally practiced, after this, can finally be convinced of the art of study, no longer affected by the speed. Let's try it!
Please choose the exactly model LCD for your iPhone. USE to replace faulty,defective,cracked,dead
iPhone 5/5S/5C display screen full assembly. Professional instructions
will save your much time to replace your old screen easily.
Notice: You need to transfer home button with
fingerprint sensor,front camera, ear speaker and silver metal plate from
your old iPhone.
Installation Notice:
1. Choose the RIGHT model and color
2.
Make sure already disconnect battery cable or power off before
installation. It could save your phone from short circuit or incorrect
installation damage.
3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
4. The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
5.
There are many screws when you replacing the assembly which are
different in size and length. Make sure each screw are installed back to
its ORIGINAL hole
6. Follow the Operation Guide or video online step by step if you are Beginner(also easy to install)
IPhone 5 LCD Display,IPhone 5 LCD Display Touch Screen,IPhone 5 LCD
Shenzhen Aokal Technology Co., Ltd. , https://www.aokal.com