Some netizens are often seen on the Internet. The smart TV or TV box at home has been disconnected from the Internet for a period of time. Computers, mobile phones have all broken down, or mobile phones can access the Internet, other devices cannot access the Internet, or simply connect routers. The login interface (192.168.1.1) cannot be entered. You must restart the router to recover temporarily. I believe many people have encountered this problem. So what causes it? How to solve it? The following Xiaobian teach everyone how to solve!
First analyze why the network will be broken
The main reason is that the router is suspended (or dead), causing network data processing to be interrupted. Why does the router crash? Because routers purchased by most homes are relatively low-end models, the chip's ability to process big data is limited. I can responsibly say that most of the routers within 100 yuan on a certain treasure are not resistant to them, and if the number of connections is too large (or the amount of data transmission is large), connection failure, suspended animation, or connection of only one device may occur. .
The solution to the broken network is as follows:
1, restart the router can be temporarily resolved.
2. You can modify the router's wifi mode 11bgn to 11g for maximum compatibility.
3, try using a wired connection,
4, upgrade the router firmware,
5, turn off the router UPNP function
6, if the problem persists, then it can only change a good point of the router.
First analyze why the network will be broken
The main reason is that the router is suspended (or dead), causing network data processing to be interrupted. Why does the router crash? Because routers purchased by most homes are relatively low-end models, the chip's ability to process big data is limited. I can responsibly say that most of the routers within 100 yuan on a certain treasure are not resistant to them, and if the number of connections is too large (or the amount of data transmission is large), connection failure, suspended animation, or connection of only one device may occur. .
The solution to the broken network is as follows:
1, restart the router can be temporarily resolved.
2. You can modify the router's wifi mode 11bgn to 11g for maximum compatibility.
3, try using a wired connection,
4, upgrade the router firmware,
5, turn off the router UPNP function
6, if the problem persists, then it can only change a good point of the router.
5G Integrated Lithium Ion Battery
5G Integrated Battery,51.2V Battery System,Integrated Lithium Ion Battery,Backup Lithium Ion Battery
Wolong Electric Group Zhejiang Dengta Power Source Co.,Ltd , https://www.wldtbattery.com