Introduction: The new WEINVIEW MT506MV5 fully absorbs the advantages of WEINVIEW MT506MV4, and adopts more advanced LED backlight module technology to solve the "blackening, dark start, low temperature start, environmental protection, life expectancy of CCFL in TFT LCD applications." Short defects and other defects, not only greatly improved service life, but also the brightness and color contrast of the display screen is greatly improved, and the running stability is more guaranteed!
Advanced LED (Light Emitting Diode) has the following advantages over traditional CCFL (Cold Cathode Fluorecent Lamps):
1) LED color gamut is wider, color saturation can reach more than 100%; CCFL color gamut is relatively narrow, most can only reach more than 80%.
2) The light source of the LED is very fast, which can help the LCD to eliminate the tailing phenomenon.
3) LED does not contain mercury, green and environmentally friendly; CCFL contains mercury, which generates radiation when it emits light, and does not meet environmental protection requirements.
4) CCFL requires high-voltage AC drive. Due to the high temperature, many backlight LCD products have yellowed on the screen and the brightness is obviously dimmed after several years of use, which affects the service life of the LCD.
5) LED has a wide temperature range, low voltage, high resistance to shock and good shock resistance. With solid-state illuminators, LED backlights have no delicate (inactive gas) components and are highly adaptable to the environment.
6) LED has a long service life. Due to low power consumption and low heat generation, the average service life is longer; the life of a normal CCFL backlight is 30,000 to 50,000 hours.
â—† Product Features Display: 5.6 256-color TFT LCD display resolution: 320 x 234
Brightness: 300 (cd/m 2)
Backlight: LED
Comparison: 250:1
LED half-life: 50,000 hrs
â—† Product Specification Processor: Intel PXA255 200MHz
Memory: 2MB
DRAM: 4MB
Serial port: 1 RS-232 (HMI-PC)
1 RS232/485 (HMI-PLC)
Recipe: Built-in (recipe card 128kB)
Self-diagnosis: Power abnormality detection input voltage: 24 VDC, 0.5A maximum
HMI size: HxWxD: 204x150x48mm
Opening size: HxW: 192x138mm
Weight: Approx: 0.85 kg
â—†Touch Panel Touch Panel: 4-wire resistive touch accuracy: 1.5mm
Surface hardness: 4H
◆Environmental specification Operating temperature: 0°- 45°C (32°-113°F)
Humidity: 10% - 90% @ 40°C, non-condensing
Vibration: 10 to 25Hz (X, Y, Z 2G 30 minutes)
EMI: FCC Class A compliant
CE: Compliance with EN50081-2 and EN50082-2 panel protection class NEMA4 / IP65
Advanced LED (Light Emitting Diode) has the following advantages over traditional CCFL (Cold Cathode Fluorecent Lamps):
1) LED color gamut is wider, color saturation can reach more than 100%; CCFL color gamut is relatively narrow, most can only reach more than 80%.
2) The light source of the LED is very fast, which can help the LCD to eliminate the tailing phenomenon.
3) LED does not contain mercury, green and environmentally friendly; CCFL contains mercury, which generates radiation when it emits light, and does not meet environmental protection requirements.
4) CCFL requires high-voltage AC drive. Due to the high temperature, many backlight LCD products have yellowed on the screen and the brightness is obviously dimmed after several years of use, which affects the service life of the LCD.
5) LED has a wide temperature range, low voltage, high resistance to shock and good shock resistance. With solid-state illuminators, LED backlights have no delicate (inactive gas) components and are highly adaptable to the environment.
6) LED has a long service life. Due to low power consumption and low heat generation, the average service life is longer; the life of a normal CCFL backlight is 30,000 to 50,000 hours.
â—† Product Features Display: 5.6 256-color TFT LCD display resolution: 320 x 234
Brightness: 300 (cd/m 2)
Backlight: LED
Comparison: 250:1
LED half-life: 50,000 hrs
â—† Product Specification Processor: Intel PXA255 200MHz
Memory: 2MB
DRAM: 4MB
Serial port: 1 RS-232 (HMI-PC)
1 RS232/485 (HMI-PLC)
Recipe: Built-in (recipe card 128kB)
Self-diagnosis: Power abnormality detection input voltage: 24 VDC, 0.5A maximum
HMI size: HxWxD: 204x150x48mm
Opening size: HxW: 192x138mm
Weight: Approx: 0.85 kg
â—†Touch Panel Touch Panel: 4-wire resistive touch accuracy: 1.5mm
Surface hardness: 4H
◆Environmental specification Operating temperature: 0°- 45°C (32°-113°F)
Humidity: 10% - 90% @ 40°C, non-condensing
Vibration: 10 to 25Hz (X, Y, Z 2G 30 minutes)
EMI: FCC Class A compliant
CE: Compliance with EN50081-2 and EN50082-2 panel protection class NEMA4 / IP65
Fiber Optic Distribution Box,Fiber Optic Breakout Box,Fibre Optic Breakout Box,Fibre Break Out Box
Cixi Dani Plastic Products Co.,Ltd , https://www.danifiberoptic.com