The market is rumored that the iPhone 6S will be available in several countries and regions around the world this fall, along with the iOS 9 mobile operating system. In June of this year, it was reported that the iPhone 6S has a similar design to the iPhone 6 and iPhone 6 Plus, but may be slightly thicker to accommodate larger capacity batteries. Reported that the product will also use the new A9 processor, while the screen size remains 4.7 inches and 5.5 inches unchanged
Previously, well-known analyst Guo Mingchi once said that the iPhone 6s will be thicker than in the past due to the integration of Force Touch technology. Nowadays, such a statement seems to have been confirmed by the shell manufacturer. According to the exclusive disclosure of GsmArena, the iPhone 6s has a body thickness of 7mm, which is 0.1 mm larger than the iPhone 6, while the iPhone 6s Plus has a thickness of 7.13 mm, which is 0.03 mm more than the iPhone 6 Plus.
Body thickness 0.1mm
According to KG’s well-known analyst Guo Mingchi’s prediction, the iPhone 6s and iPhone 6s Plus will not change much in appearance, but the size of the body will be wider and longer than the current iPhone 6 and iPhone 6 Plus. The increase of 0.15 mm, and the thickness of the fuselage will also increase by 0.2 mm, mainly because the next generation iPhone will integrate Force Touch technology in the touch screen.
Now, this statement seems to be confirmed. According to the exclusive disclosure of the foreign website GsmArena, the production of mobile phone case/shell manufacturer ITSKINS has begun to design a special protective case for the iPhone 6s and iPhone 6s Plus, and from the design artwork released by the company, the iPhone 6s series More than the thickness of the fuselage in the past. Among them, the iPhone 6s has a thickness of 7.0mm, which is 0.1mm thicker than the iPhone 6, while the iPhone 6s Plus has a relatively small change. The thickness of the iPhone is 7.13mm, compared to the iPhone 6 Plus, which is 0.03mm.
Equipped with Force Touch technology
At the same time, as Guo Mingchi said, the main reason for the thickening of the iPhone 6s series is related to the Force Touch pressure panel. At the same time, this is also after the MacBook, Apple Watch, Apple is equipped with a new touch of pressure technology, and in the program code of the iOS 9 system, there is also evidence that there are new gesture instructions specially created for the Fouce Touch pressure touch technology.
However, at present, it is not possible to judge the authenticity of the material due to the design of the mobile phone case manufacturer, even if the iPhone 5c protective case that the manufacturer exposed in the past is finally confirmed to be very accurate. But in any case, the iPhone 6s series will not be too much change in shape. It may only be expected to change the body material of Apple. For example, as disclosed by Guo Guomingchi, the iPhone 6s series The 7000 series aluminum metal body will be used for higher hardness, thus avoiding the problem of “bending the door†again.
Or will be released in September
The iPhone 6s is also rumored to increase the memory capacity to 2GB, equipped with the new A9 processor, and upgraded the camera to 12 million pixels, with faster focus speed and GBW sensor technology. At the same time, the newly exposed logic board also shows that the iPhone 6s is equipped with a faster communication module that supports LTE Cat.6 technology.
In addition, since the iPhone 6s series has been rumored to have been produced, it is natural for the protective cover manufacturers to start preparing parts production. According to sources, the iPhone 6s series may be released on September 15th and then officially launched on September 25th.
What's more worth mentioning is that on July 3, 2015, although many mobile phone manufacturers are trying to develop their next-generation mobile phone products in a thinner and lighter direction, Apple seems to have stopped this blind follow-up. The footsteps. It is reported that Apple is currently studying the feasibility of integrating heart rate detection, skin conducivity sensors, fingerprint recognition and other sensors into the iPhone Logo.
In an application filed by the United States Patent and Trademark Office, called "concealed electrical connectors", on Thursday, the company detailed a series of The idea of ​​integrating electronic systems into the gaps and surfaces of existing devices is detailed with the logo behind the existing iPhone and iPad as an example.
In the document, Apple said that because some of the electronically conductive components are to be embedded in the base of the device, it is possible to use the existing product logo for masking. In the examples that follow, Apple said it is possible to place 3-8 insulated connectors inside the "iPhone" on the back of the existing iPhone (especially at the corners of the letters), and the word "iPhone" appears. It will make it less easy for consumers to discover the existence of these parts.
On the sensor side, the document also mentions the idea of ​​integrating heart rate detection, skin conductance sensors, fingerprint recognition and other sensors into the iPhone Logo.
At the same time, Apple also talked about the application of the charging interface and other mechanical interface design (such as the Megsafe magnetic interface on Mac computers) and the wireless charging function that was first introduced in Apple Watch not long ago. However, the company did not detail the future application of these designs in this document.
Of course, as with many previous Apple patent applications, it is unclear whether any of the above features or design ideas will appear in any production model in the future. However, with the existing iPhone 6, this model uses the most integrated design possible. In addition to an Apple logo and two antennas on the back of the phone, there is a lot of space available, such as adding a biometric sensor. And some other sensors.
It should be noted that Apple's patent application was first filed in December 2013. Its inventor is Nicholas King, who is also a patent for iOS simultaneous interactive augmented reality screen and wireless sharing technology. inventor.
Car Tire Pump,Tyre Air Pump,Electric Tire Inflator,Best Portable Air Pump For Car Tires
SHENZHEN SMARTNEWO TECHNOLOGY CO,. LTD , https://www.newopump.com